Posted on Leave a comment

Troodon Pi Cam Mount

A3DP is happy to introduce our latest PiCam Mount for the Troodon!

It still mounts in the front-right corner as with the one we recommended before.

For assembly, start by plugging in the pi cable into the Pi Cam, place the cam in the red piece (as pictured above) then snap the yellow piece on. Next you will need a M3x20mm bolt to assemble the gray bottom mount to the yellow back plate. Finally, you will need a M4x12mm bolt and a 3030 hammer/ or t-nut for mounting to the front-right extrusion on your Troodon.

Please see the attached screen shot for slicer print orientation. I would suggest 0.16-0.2mm layers, ABS material for easier breakaway supports. The rear face may require some light sanding.

Slicer Placement Suggestion, Support Slab recommended (green box)

CAD & STL Files

Inspired by the following projects:

Front housing: https://www.thingiverse.com/thing:4695691

Back cover: https://www.thingiverse.com/thing:2746186

Base: https://www.thingiverse.com/thing:4094745