A3DP Slicer 2.7.62-beta3: Modix profiles, crash recovery, and smarter error handling

A3DP Slicer 2.7.62-beta3: Modix profiles, crash recovery, and smarter error handling

Our in-house slicer — A3DP Slicer, built on SuperSlicer and tuned for the machines we service — just hit its third beta of the 2.7.62 line, and this one is the biggest jump yet. If you run a Modix, or you've ever lost an afternoon of slicer tweaks to a crash, this release is for you.

Built-in Modix profiles

A3DP Slicer plater with a Benchy loaded and the Modix BIG-60 IDEX profile selected

The headline: full profile sets for the Modix BIG series are now bundled, no more importing community ini files or hand-typing machine settings.

  • BIG-60, BIG-120X, BIG-120Z, BIG-180X and the Big-Meter — each in single-extruder and IDEX dual-extruder variants
  • Values merge Modix's own vendor-tuned defaults with settings validated on real customer machines during our on-site tuning visits
  • Bed grids, thumbnails, and IDEX toolchange settings included

The IDEX variants are labeled as a placeholder set for now — we'll finalize toolchange G-code as we capture configs from the machines that come through the shop.

Crash recovery

Crash recovery prompt offering to restore the previous session

The slicer now auto-saves your session — the loaded project and your preset/setting changes, debounced so it never hammers the disk. If the app dies, the next launch detects it and offers to restore everything exactly where you left it. Kill-proof your workflow.

Preferences showing the crash session backup toggle

Error messages that help instead of stopping you

Config error dialog offering to clear foreign custom G-code sections and re-slice

Config errors used to be a dead end — a message and an OK button. Now they offer:

  • Open setting — jumps straight to the offending option in the settings tabs
  • Auto-fix — where a safe correction exists (e.g. a value out of its valid range), one click applies it and re-validates

And when slicing fails because a project carries custom G-code from a different slicer (Bambu Studio templates, for example), you get a one-click "clear foreign sections and re-slice" instead of a hard stop.

Opens projects other slicers saved

Loading a project saved by another slicer — or an older one — used to fail hard on values it didn't recognize. Out-of-range and foreign settings are now handled gracefully, so your archive of projects just opens.

Per-extruder edits without saving

The preset-switch dialog with the new Hold button for per-extruder edits without saving

Switching between extruders on a multi-material project used to force a save-or-discard choice. The new Hold option stashes your unsaved changes, lets you set up the other extruder, and restores your edits when you switch back.

Downloads

Direct downloads for 2.7.62-beta3 — or grab everything, checksums included, from the GitHub release page:

Platform Download Size
Windows 10/11 A3dp-Slicer_2.0.02.0.msi (installer) 97 MB
Linux — x64 (GTK3) A3dp-Slicer-linux-x64-GTK3.AppImage 93 MB
Linux — x64 (GTK3) A3dp-Slicer-linux-x64-GTK3.tgz (tarball) 101 MB
macOS — Intel A3dp-Slicer-macOS-intel.dmg 95 MB
macOS — Intel A3dp-Slicer-macOS-intel.tgz (tarball) 91 MB
macOS — Apple Silicon A3dp-Slicer-macOS-arm.dmg 92 MB
macOS — Apple Silicon A3dp-Slicer-macOS-arm.tgz (tarball) 88 MB

It's a beta: kick the tires on non-critical projects first, and report anything odd on GitHub — the 3MF-loading fixes in this build came straight from a real-world project report.

For Modix owners

If your Modix prints well but you want it printing right — pressure advance, input shaping, kinematics — that's our bread and butter. The same field-tuning process that produced the values in these profiles is what we do on-site. While you're here, try the interactive Pressure Advance Calibrator and the PA tuning guide — both built on the same methodology.

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.