PolyLite™ ABS is made with a specialty bulk-polymerized ABS resin, which has significantly lower volatile content compared to traditional ABS resins. It delivers excellent printing quality with minimal odor during printing, with excellent heat resistance and mechanical strength.
Density: 1.04 g/cm³
Print Settings
Printing temperature: 245°C – 265°C
Bed temperature: 90°C – 100°C
Printing speed: 30 mm/s – 50 mm/s
Cooling fan: OFF
Direct drive retraction: 1 mm / 20 mm/s — indirect drive: 3 mm / 40 mm/s
Drying (only if the material has absorbed moisture): 70°C for 6 h
Printing Requirements
Enclosure that can trap ambient air and keep it hot
All-metal hotend that can reach 250°C+ is recommended, though not needed
And that's all! You can use Magigoo Original to help with build plate adhesion. If using a stock, older style printer — print slower.
Ships from our shop. Questions about shipping, returns, or lead times? Contact us — a human answers.
TESTED
Tested in our shop
Every product we list runs on our own machines before it earns a spot in the store. What you read here is what we measured — including the parts that failed.
