Fiberon™ PA612-CF15 is a carbon fiber reinforced (15%) long-chain copolyamide (PA612) filament. Thanks to its chemical structure, it has lower moisture sensitivity than PA6/66 and PA6-based materials and better mechanical properties than PA12-based materials. The carbon fiber reinforcement and Warp-Free™ technology enhance the dimensional stability of prints.
Fiberon™ PA612-CF15 is the same great formula as PolyMide™ PA612-CF, although it may print in a slightly darker black shade than its predecessor.
Density: 1.03 g/cm³
Print Settings
Printing temperature: 250°C – 300°C
Build plate temperature: 40°C – 50°C
Chamber temperature: room temperature
Printing speed: up to 300 mm/s
Cooling fan: OFF
Direct drive retraction: 3 mm / 40 mm/s — indirect drive: 6 mm / 60 mm/s
Drying (only if the material has absorbed moisture): regular oven 100°C for 10 h, or PolyDryer™ Level 3 for 18 h
You'll want a hardened nozzle for this — glass and carbon fibers eat brass nozzles. The copper-core CHT-style nozzle below also keeps flow up on high-temp materials. Nylon drinks moisture out of the air — print it from a drybox or dry it first, or you'll print bubbles and stringing no matter how good your tuning is.
Ships from our shop. Questions about shipping, returns, or lead times? Contact us — a human answers.
TESTED
Tested in our shop
Every product we list runs on our own machines before it earns a spot in the store. What you read here is what we measured — including the parts that failed.
