Polymaker™ PETG is the new, faster, stronger and easier-to-print successor to PolyLite™ PETG. Its high-flow formulation enables clean, accurate extrusion at speeds up to 300 mm/s (over 500 mm/s with high-flow nozzles) while maintaining excellent layer adhesion, durability and surface finish — strong, dimensionally stable parts right off the bed.
Less brittle and more impact-resistant than PLA, with broad chemical resistance and roughly 70°C HDT, it suits gears, brackets, fixtures, outdoor tools and cosplay props. Prints without an enclosure and works seamlessly with AMS and multi-material systems.
Density: 1.30 g/cm³
Print Settings
Printing temperature: 240°C – 260°C
Bed temperature: 60°C – 70°C
Printing speed: up to 300 mm/s
Part cooling fan: 20% – 60%
Direct drive retraction: 1 mm / 20 mm/s — indirect drive: 3 mm / 40 mm/s
Drying (only if the material has absorbed moisture): 60°C for 6 h
Printing Requirements
None! This will print great on any stock 3D printer.
Warning: Polymaker PETG is very hygroscopic — wet PETG causes stringing and poor surface quality. Keep it dry (PolyDryer™ recommended).
Ships from our shop. Questions about shipping, returns, or lead times? Contact us — a human answers.
TESTED
Tested in our shop
Every product we list runs on our own machines before it earns a spot in the store. What you read here is what we measured — including the parts that failed.
