Polymaker PolyTerra Dual Matte PLA

Polymaker Panchroma™ Dual Matte PLA (formerly PolyTerra™ Dual Matte)

Panchroma™ Dual Matte PLA is a bioplastic based 3D printing filament with two different colors in the same filament — one color on the left and a different color on the right — creating printed parts with a dynamic dual-tone matte effect that conceals layer lines.

Designed from the ground up as a next-generation PLA: ease of use, print quality and high-speed capability up to 300 mm/s, with minimal stringing and warping.

Print Settings

• Printing temperature: 190°C – 230°C
• Bed temperature: 25°C – 60°C
• Printing speed: up to 300 mm/s
• Part cooling fan: ON
• Direct drive retraction: 1 mm / 20 mm/s — indirect drive: 3 mm / 40 mm/s
• Drying (only if the material has absorbed moisture): 55°C for 6 h

Printing Requirements

• None! This will print great on any stock 3D printer — just print slower on stock, older style printers.
• Panchroma™ Matte is slightly more abrasive than regular PLA.

Panchroma™ Technical Data Sheet (V2)